bing tracking image

Best Mazda CX-7 Bike Racks

change vehicle


Bike Rack Videos

Thule Roof Bike Racks Review - 2012 Mazda CX-7

Today on our 2012 Mazda CX 7, we're doing a test fit of the Thule Circuit XT roof mounted bike rack. That part number is TH526XT. Now, we already have our bike secured down. We're first going to show you how we secure it in place and then we'll go over some features of the rack. Here on the back, we have our ratcheting strap that you're going to see on most of your Thule bike racks. We'll just push that out of the way.



Rhino Rack Road-Warrior Roof Bike Racks Review - 2012 Mazda CX-7

Today on our 2012 Mazda CX-7, we're doing a test-fit of the Rhino-Rack Road Warrior Roof-Mounted Bike Rack. That part number is RBC036. We already have our bike secured down. First going to show you how we do that. In the back here we're going to have a ratcheting strap that you're going to see on most of your Rhino-Rack roof-mounted bikes there. The great thing about it is that it does move up and down the length of the bike rack to accommodate different bikes you may have.



Rhino Rack MountainTrail Roof Bike Racks Review - 2012 Mazda CX-7

Today, on our 2012 Mazda CX7, we're doing a test fit of the Rhino Rack mountain trail rooftop bike rack. That part number is RVC035. Now we already have our bike secured down. First, we're going to show you how we do that, and then we'll go over some features. So here in the back, we have our ratcheting strap. You're going to see this on most of our Rhino Rack bike racks.



Inno Roof Bike Racks Review - 2012 Mazda CX-7

Today on our 2012 Mazda CX-7, we're doing a test fit of the INNO Multi-Fork Lock Roof Mounted Bike Rack. That part number is INA392. Now we already have our bikes secured down, first going to show you how we do that and then we'll go over some features. Here in the back, we have our wheel cradle with our ratchet strap. We're just going to push our button and feed that through. Then in the front, we have quite a few different things going on.



Inno Roof Bike Racks Review - 2012 Mazda CX-7 INA391

Today on our 2012 Mazda CX7, we're doing a test fit of the Inno fork lock 3 roof mounted bike rack. That part number is INA391. Now, we already have our bike secured down. First, we're going to show you how we do that. Here in the back, we have a ratcheting strap that you're going to see on most of our Inno roof racks. I'm just going to push our button and pull that strap through and set it off to the other side. Now, here in the front, we have a lock and cover. We'll just lift that up and out of the way.



RockyMounts TieRod Roof Bike Rack Review - 2012 Mazda CX-7

Today on this 2012 Mazda-cx 7 we are going to be test fitting the Rocky Mount Tie Rod, Roof Mounted Bike Carrier part number RKY1014. We already have roof rack installed on our Mazda so now were ready to go ahead and fit the tie rod upon the top of the rack. First we are going to position the bike carrier upon the top of the roof rack and the front will take the steel straps the coded rubber wrap them around front cross bars, put them back front point and tie them down with a 6 mm Allen ranch. In the rear well position the clamp around the roof crossbar and tie it down using the wheel nuts.With the straps upfront, the clip and the roof tightened down, the bike rack installed and were ready to load up the bike. This is a fork mount bike rack so we will need to remove the front tire from the bicycle. Remember this rack can only be used with bikes that have a quick release secure.



Yakima DoubleDown Ace 2 Bike Rack Review - 2010 Mazda CX-7

Today on our 2010 Mazda CX7, we'll be test fitting the Yakima DoubleDown Ace 2-bike carrier for 1-1/4" and 2" hitches, part number Y02450. To begin our test fit, we'll slide the shank of the carrier into the receiver tube of the hitch, line up the pin holes, and install the attached pin. We'll move to the rear of the shank and use the hand knobs to secure our bike rack to our vehicle and engage our anti-rattle device. Now we'll go over some clearance measurements. We have about 9-1/2" of ground clearance. The closest point of our carrier to the rear of our CX7 is about 2".



Thule Vertex 4 Hitch Bike Rack Review - 2010 Mazda CX-7

Today on our 2010 Mazda CX7 we'll be test fitting the Thule Vertex Four Bike Carrier for 1-1/4 and 2 Inch Hitches, part number th9029. To begin our test fit we'll slide the shank of the carrier into the receiver tube of the hitch. Line up the pin hole and thread in our anti-rattle bolt tightening it with a wrench.Now we'll go over some clearance measurements. We have about 11 inches of ground clearance. We've added about nine inches to the overall length of our CX7. We'll pull the lever at the base of the carrier to allow our carrier to tilt away from our vehicle.



Thule Helium Aero Hitch Bike Rack Review - 2010 Mazda CX-7

Today on our 2010 Mazda CX7, we'll be test fitting the Thule Helium Aero 2-bike carrier for 1-1/4" and 2" hitches, part number TH9042. To begin our test fit, we'll slide the shank of the carrier into the receiver tube of the hitch, line up the pin hole, and allow the attached pin to fall into place. We'll then use the hand knob at the rear of the shank to secure our bike rack to our vehicle and engage our anti-rattle device. Now we'll go over a few clearance measurements. We have about 14" of ground clearance. The closest point of the carrier to the rear of the vehicle is about 1".



Thule Apex 4 Hitch Bike Rack Review - 2010 Mazda CX-7

Today on our 2010 Mazda CX7, we'll be test fitting the Thule Apex 4 Bike Carrier for 1-1/2-inch and 2-inch hitches, part number TH9029. To begin our test fit, we'll slide the shank of the carrier and then the receiver tube of the hitch. Line up the pin hole and allow our attached pin to fall into place. We'll move to the rear of the shank and use a hand knob to secure our bike rack to our vehicle and engage our anti-rattle device. Now, we'll go over some clearance measurement. We have about 11 inches of ground clearance.





Mazda CX-7 Bike Rack Questions